Need more performance from your regular street trucks?
A Sabre "Street" kit consists of two and two 10.5mm in your choice of durometer for maximum lean and carve.
This kit fits perfectly in They are slightly bigger than most other regular skate trucks, but you can often get them to fit in Paris Street Trucks or Polar Bear trucks by not running the bottom washer. Measure your existing bushings first!
Bigger bushings in street trucks give a plusher, leanier and more tunable ride.
Each kit contains four bushings and a sticker, packed in a recyclable paper bag. Gravity poured from Sabre's own formula in the USA.
- Make your regular skate trucks turn more!
- Street Cones: 10.5mm/0.4" tall
- Barrels: 16mm/0.6" tall
- Kit of 4 bushings - enough for a complete longboard
- Packed with a sticker in a recyclable paper bag
- Available in X-Type (86A Orange), F-Type (90A Purple), R-Type (93A Green), H-Type (96A Grey) and E-Type (99A Yellow)
Use the table below to select the correct durometer:
- Cruising and Carving
| Skater weight | Durometer |
| 50 - 100 lbs / 23-46kgs | 65A-80A |
| 75 - 125 lbs / 35-57kgs | 80A-85A |
| 100 - 145 lbs / 46-66 kgs | 85A-88A |
| 125 - 175 lbs / 57-80 kgs | 87A-91A |
| 145 - 195 lbs / 66-89 kgs | 88A-94A |
| 175 - 220+ lbs / 80-100+ kgs | 91A-97A |
- Freeride
| Skater weight | Durometer |
| 50 - 100 lbs / 23-46kgs | 68A-80A |
| 75 - 125 lbs / 35-57kgs | 80A-85A |
| 100 - 145 lbs / 46-66 kgs | 84A-88A |
| 125 - 175 lbs / 57-80 kgs | 86A-92A |
| 145 - 195 lbs / 66-89 kgs | 90A-95A |
| 175 - 220+ lbs / 80-100+ kgs | 93A-98A |
- Downhill & TopSpeed
| Skater weight | Durometer |
| 50 - 100 lbs / 23-46kgs | 68A-80A |
| 75 - 125 lbs / 35-57kgs | 80A-85A |
| 100 - 145 lbs / 46-66 kgs | 85A-88A |
| 125 - 175 lbs / 57-80 kgs | 88A-93A |
| 145 - 195 lbs / 66-89 kgs | 90A-96A |
| 175 - 220+ lbs / 80-100+ kgs | 94A-100A |
For loads more additional info on how to choose bushings and dial in your trucks for the perfect ride, (opens in a new page)